Flexible and neatly connectors
“U” style connector and extension connectors are flexible; 5PCS extension connectors, total length: 33.5 inch. these are convenient to connect, also keep the cabinet neatly and beautiful.
6 x LED light bar,
5 x straight connector, 3 X “U” style connector,
1 x ETL Listed adaptor, 1 X dimmer, 1 X remote,
2 x cable holder, 8 X PINs.
Volt In.: AC 100-240V
Volt Out.: DC 12V, 2A
Power: 2W/PC, Total 13W
Lumen: 250lm/bar, 1500lm/kit
Beam Angle: 120 degree
CRI: >80, Colar temperature:2700K.
Length of Light Strip:0.5 meter/PC, Total 3 meter.
1.Before installing ,make sure the destination surface clean and dry.
2. The included power supply can be connected to a maximum of 12 light bars, and cannot be overloaded, If overloaded, it may damage the power supply or cause flicker.
LED Shelf Light
The 1st control method
Control range: 40-60 ft
Signal can go through the obstacles( Cabinet, Door, Wall…).
After re-match, 1 remote can control many matched lights.
Remote can be perfect to adjust the brightness or setting a timing off this cabinet light kit.
The 2nd control method
Click the button to turn on/ off light.
When turn on the light, press the button to adjust the brightness,the brightness will go down, then up to MAX.
When turn off the light, press the button will go to “re-match”status. the light will flick. please refer to “re-match” function.
How to “re-match”?
After plug in the power, turn on the light bar(to make sure all the connection is right).turn off the light(just click the button on the dimmer, all the connection is still fine),
press (about 3 seconds)the button on the dimmer to go into the “match” status, then press the on/off button on the remote.
The dimmer is in “match” status when the strip is flick, the “re-match” is done when the strip changes to constant on. try to control the light bar with the matched remote.
2700K warm white
Number of LEDs
RF Remote controller
Hand wave activated
Motion sensor + light sensor
Remote controller + Button
RF Remote controller
DIY LED light strip: 6 PCS pre-cut strips, total 9.8ft, many kinds of connection option, Great way to upgrade your cabinets, closet, desk, TV back, bookshelf, bed, wardrobe, display case etc
Super Bright & Brightness adjustable: Super bright LED cabinet lights delivers total 1500 lumen, Came with RF dimmer to adjust the brightness
RF Wireless remote control: 17-Key RF remote has timing off, dimming, hot buttons, rematch and dynamic function, 60 feet control distance
Reliable kit: High quality adapter and strip light, The LED tape light working voltage is DC12V, extremely Low voltage and heat
Easy installation: All installation accessories are included. No tools required. Install light bars by yourself in minutes, just Clean – stick on -connect. Backed with strong adhesive tape, screw-free to protect your furniture
$20.99 - $17.84
(as of May 31,2021 17:18:58 UTC – Details)